How do you build your first Gundam Assemble miniature from ST01?
For a first build from Gundam Assemble Starter Set 01, try Gundam Barbatos Lupus Rex. Its sequence stays on one plastic frame, marked M2, until the model goes onto its hexagonal base. Open the construction manual to printed page 008 and keep that drawing beside your work. Bandai’s ST01 construction manual
Find M2 before making a cut
A runner is the plastic frame that holds the parts. Look for the moulded M2 label, then find the small numbers beside the pieces. M2 part 2 and L2 part 2 belong to different builds. Keep the rest of the frames in the box and free only what the current panel shows, using nippers intended for plastic models.
M2Frame8PartBarbatos • one clawed arm
The other clawed arm is M2 part 5. The two numbers identify different pieces on the same frame.
Open Bandai’s drawing at printed page 008Build the pose in three passes
- Start with the cluster labelled M2 parts 1 through 4. Trace the arrows to see which surfaces meet. Compare the outline of this small assembly with the next drawing before adding the legs.
- Find parts 7 and 6 for the legs. Lay them under the body in the same orientation as the page. The stance is asymmetrical, so use the shape of the bent leg as your reference if you turn the body around.
- The two long clawed arms are parts 8 and 5. Keep track of which is which until both are seated. Hold the torso while attaching an arm so the long claws do not have to take the pressure.
Where does the model attach to the base?
Look below the raised foot in the finished drawing. Follow the highlighted mounting point to the matching hole in HEX part 1. The finished silhouette is a useful check here. The pose is supported where the manual shows it, even though both feet might look like natural attachment points at first glance.
Can I use the same runner numbers for the next suit?
Each suit has its own diagram. On the very same page, Char’s Zaku II switches to runner L2 and has warnings beside specific cuts. Leave its pieces attached until you have located those marks. If your cutters are still on the shopping list, see our guide to model-building tools.
